Anistel Phoenix Surface Disinfectant Non-Fragrant - 1Litre

Anistel Phoenix Surface Disinfectant Non-Fragrant - 1Litre

SKU : VETANI022
In Stock
Brand Image
 
Click on stars to rate this product
     
Add
Write a review
Anistel Phoenix Surface Disinfectant is a multi-purpose cleaning and disinfecting solution for surfaces in animal healthcare environments.
Read more about this product »
£11.29
Add to Basket
  • Anistel Phoenix Surface Disinfectant Non-Fragrant - 1Litre
  • Reviews

Anistel Phoenix Surface Disinfectant Non Fragrant - 1 Litre

Anistel Phoenix Surface Disinfectant is a multi-purpose cleaning and disinfecting solution for surfaces in animal healthcare environments. PHOENIX is effective at the economic dilution of 1:200, making it by far the most effective dilution on the market.

Anistel Phoenix Surface Disinfectant:

    PHMB Free
    For multi-purpose surface cleaning and disinfection
    Bactericidal, fungicidal, yeasticidal and virucidal
    The most effective dilution on the market

 

The Anistel range was specifically designed for the companion animal industry and is a complex blend of disinfectants and specialised detergents. These deliver the high grade efficacy you need in your animal environments and the safety and duty of care to your staff and animals is never compromised when using Anistel products as directed.

•Two simple dilutions.
•5 minute contact time.
•Non-toxic.
•Non-corrosive.
•Non-staining.
•Non-irritant.
•No rinsing required - simply allow to dry.

Anistel Phoenix Surface Disinfectant is perfect for:
•Consult rooms.
•Kennels & Stables
•Theatres.
•Monitor cases.
•Control panels.
•Floors & walls.
•Reception areas.


The benefits of using ANISTEL PHOENIX:-

A COST-SAVING SOLUTION
PHOENIX has been developed with efficacy, ease of use, safety and economy in mind. For daily cleaning under normal conditions, floors, walls and un-occupied animal habitats are washed down with PHOENIX at a dilution of 1:200. For high-risk areas and soaking of bedding, PHOENIX is used at a dilution of 1:100.  PHOENIX user dilutions are half those of alternative disinfectants, resulting in considerable cost savings.

POWERED BY TRISTEL’S PROPRIETARY CHLORINE DIOXIDE TECHONOLOGY
The PHOENIX formulation is based on a combination of quaternary ammonium compounds and stabilised chlorine dioxide (ClO2), with a specialist blend of surfactants and chelating agents to boost cleaning performance.  Each ingredient contributes to the high performance level of PHOENIX. It effectively destroys microorganisms while safeguarding patients, staff health and safety as well as material integrity.

ENHANCED HEALTH & SAFETY
PHOENIX
concentrate solution has been tested according to the “Test Guideline of the Organisation for Economic Co-Operation and Development (OECD)”. This Guideline is used to determine the safety of chemicals and chemical preparations. OECD 435 is the in-vitro membrane barrier test for skin corrosion, which has been used to assess the skin corrosiveness of PHOENIX using an artificial skin surrogate. Results confirm that PHOENIX concentrate is not classified as corrosive under the test constraints outlined in OECD 435.

BETTER COMPLIANCE
PHOENIX complies with the Classification, Labelling and Packaging (CLP) Regulation, which is the European interpretation of the Global Harmonisation System for Classification. Its aim is to drive greater consistency in chemical labelling across the world, with the goal of increasing user and environmental safety associated with use of chemicals. CLP became mandatory on 1 June 2015 and replaced the Dangerous Substances Directive (DSD) and the Chemicals Hazard Information and Packaging for Supply (CHIP).
The CLP statements and pictograms indicated on the PHOENIX label and Material Safety Data Sheet correspond to the concetrate solution only. When diluted at recommended concentrations, PHOENIX is not classified as hazardous.


 


  Average rating (0 reviews) Write a Review